All-in-one combo · WDC7200XCD

Splendide Splendide WDC7200XCD Ventless Combination Washer/Dryer

23.75" W × 22.25" D × 33.375" H · Standard 120V outlet · Ventless (condenser)

Check it against your closetView at merchant

Hookups required

120VNo ventDrain

Spec snapshot

Dimensions (W×D×H)
23.75 × 22.25 × 33.375 in
Power
120V / 11A
Venting
Ventless (condenser)
Drain / water
Drain required · Hot & cold water
Price (approx)
$1,497
This is a reference page, not a guarantee. Clearances shown are the manufacturer's required minimums. Verify the exact opening, door path, and hookups before buying.

Evidence

Where these specs come from

Source: Splendide official data sheet (WDC7200XCD Condenser Combo) (official)

Accessed 2026-07-09. Specs last verified 2026-07-09. Confidence: medium.

Dimensions: 23.75"W x 33-33.4"H x 22.6"D | Capacity: Wash - 2 to 15 lbs / Dry - 2 to 11 lbs | Volt/Amp/Hz: 120V, 11 Amp, 60 Hz | NO DRYER VENT REQ. ON THIS MACHINE: This machine incorporates an internal condenser for drying... no vent is needed. | Standpipe Drain System / Sink Draining Req: Needs a 1 1/4" minimum diameter standpipe

Fit notes

What to check for your space

  • Body width 23.75" must clear your door frame, not just the closet.
  • Runs on a standard 120V outlet.
  • Ventless — no exhaust duct needed per the manufacturer.
  • Needs a drain and water supply.

Note: SUBSTITUTION: requested model Splendide WFL1300XD is a washer-only unit (pairs with a separate DV6500X/DV6400X dryer, per Splendide's own product page: 'Meant to be paired with our DV6500X dryer'), not an all-in-one combo. Substituted with Splendide WDC7200XCD, their actual single-drum ventless condenser combo. Capacity is spec'd by Splendide only in lbs (15 wash/11 dry), not cu ft — left null rather than estimated. merchant_primary/source enum deviates from the requested list (appliances-connection/aj-madison/home-depot/lowes/best-buy) because none of those carry RV/marine Splendide units; used Camping World (a major RV specialty retailer) instead — flagging this as a deviation. Water hookup (hot & cold) inferred from 'H C' labeled water inlets on the datasheet rear-view diagram, not from explicit prose.

Feedback

Did this page help?

One tap tells us whether this page is useful.